Step 6: Attach the Back Cover Plate
A. Align the back console cover plate (7) over the back of the console
housing and attach using the 4 screws (H), pre-installed in the console
housing frame mount. Note: Be sure to align the tabs at the top of the
back cover plate so the plate fits flush to the back of the console housing.
Step 7: Lock Console Angle
A. Using the 5 mm Allen wrench tighten the 2 Allen head bolts located at
each end of the console support tube as shown in the figure below.
Assembling Your Treadmill
Securely Tighten
M4 x 10L
Screw
PRE-INSTALLED
5mm Allen
Wrench w/
Phillips
M8 x 15L
PRE-INSTALLED
5mm Allen
Wrench w/
Phillips
27