Kit Assembly - Metra Electronics 99-8239B Installation Instructions Manual

ISO DIN radio provision with pocket
1. Secure the radio brackets to the radio
trim panel using (2) #8 x 3/8" Phillips
truss head screws supplied. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Secure the radio to the radio-bracket/
trim assembly using screws supplied
with the radio. (Figure B)
4. Secure the pocket to the radio-bracket/
trim assembly using (4) #8 x 3/8" Phillips
pan head screws supplied. (Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
6. Reassemble the dash in reverse order
of disassembly.
99-8239B

Kit Assembly

(Figure A) (Figure B)
3