Kit Assembly - Metra Electronics 99-7018 Series Installation Instructions Manual

1. Attach the radio brackets to
the radio trim panel using (4)
#(8) x 3/8" Phillips screws
supplied. (Figure A)
2. Attach the pocket to the bracket/
panel assembly using (4) #8 x 3/8"
Phillips screws supplied. (Figure B)
3. Remove the metal "DIN" sleeve
and trim ring from the
aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure C)

Kit Assembly

(Figure A)
(Figure B)
99-7018
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
3
(Figure C)