IBM IntelliStation 6836 Hardware Maintenance Manual page 103

Diagnostic Error Code
015-196-XXXUSB port test halt, error
threshold exceeded
015-197-XXXUSB port test warning
015-198-XXXUSB port test aborted
015-199-XXXUSB port test failed, cause
unknown
018-000-XXXPCI Card Test Passed
018-0XX-XXXPCI Card Failure
018-195-XXXPCI Card Test aborted by user
018-196-XXXPCI Card test halt, error
threshold exceeded
018-197-XXXPCI Card test warning
018-198-XXXPCI Card test aborted
018-199-XXXPCI Card test failed, cause
unknown
018-250-XXXPCI Card Services error
020-000-XXXPCI Interface Test Passed
FRU/Action
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
1. If a component is called out, make sure
it is connected and/or enabled
2. Flash the system and re-test
3. Go to the "Undetermined problems"
section
1. Go to the "Undetermined problems"
section
2. Flash the system and re-test
3. Replace component under function test
1. No action
1. Riser card, if installed
2. System board
1. PCI card
2. Information
3. Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
1. Make sure the component that is called
out is connected and/or enabled
2. Re-run test
3. Component that is called out in warning
statement
4. Component under test
1. Make sure the component that is called
out is connected and/or enabled
2. Flash the system and re-test
3. Go to the "Undetermined problems"
section
1. Go to the "Undetermined problems"
section
2. Flash the system and re-test
3. Replace component under function test
1. PCI card
2. Riser card, if installed
3. System board
1. No action
Chapter 7. Symptom-to-FRU index
95