IBM IntelliStation 6836 Hardware Maintenance Manual page 113

Table 5. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet controller
Event ID Type
01 Error
02 Error
03 Error
04 Error
05 Error
06 Informational
07 Informational
08 Informational
09 Informational
10 Warning
11 Informational
12 Warning
13 Informational
14 Informational
15 Error
16 Informational
17 Informational
18 Informational
19 Informational
20 Informational
21 Warning
Description
Explanation:Team Name and physical adapter name are the same. This is
an invalid configuration. Action:Reconfigure the adapter team by
double-clicking the PROSet icon in the control panel.
Explanation:Unable to allocate required resources. Action:Free some
memory resources and restart.
Explanation:Unable to read required registry parameters.
Action:Reconfigure the adapter team by double-clicking the PROSet icon
in the control panel.
Explanation:Unable to bind to physical adapter. Action:Reconfigure the
adapter team by double-clicking the PROSet icon in the control panel.
Explanation:Unable to initialize an adapter team. Action:Reconfigure the
adapter team by double-clicking the PROSet icon in the control panel.
Explanation:Team nn. Primary adapter is initialized. Action:None.
Explanation:Team nn. Secondary adapter is initialized. Action:None.
Explanation:Team nn. Virtual adapter or Team is initialized. Action:None.
Explanation:Team nn. Primary adapter is switching over. Action:None.
Explanation:Team nn. Adapter link down. Action:Make sure the adapter
is functioning properly.
Explanation:Team nn. Secondary adapter took over. Action:None.
Explanation:Team nn. Secondary adapter is deactivated from the Team.
Action:Make sure the secondary adapter is functioning properly and that
the adapter cable is securely connected to the LAN.
Explanation:Team nn. Secondary adapter has rejoined the Team.
Action:None.
Explanation:Team nn. Secondary adapter link is working. Action:None.
Explanation:Team nn. The last adapter has lost its link. Network
connection has been lost. Action:Shut down the computer and replace the
adapters; then, restart the system to reestablish the connection.
Explanation:Team nn. An adapter has reestablished the link. Network
connection has been restored. Action:None.
Explanation:Team nn. Preferred primary adapter has been detected.
Action:None.
Explanation:Team nn. Preferred secondary adapter has been detected.
Action:None.
Explanation:Team nn. Preferred primary adapter took over. Action:None.
Explanation:Team nn. Preferred secondary adapter took over.
Action:None.
Explanation:Team nn. Primary adapter does not sense any Probes.
Possible reason: partitioned Team. Action:Make sure the cables of the
adapter team are connected to the same LAN segment. Reconfigure the
team if necessary.
Chapter 7. Symptom-to-FRU index
105