Playback Mode - Kompernass DASHCAM CR 5 A1 Operating Instructions Manual

Resolution
If you access this menu option, then you can use the ▲▼ buttons
the desired resolution for your photos: "12MP (interp.*)", "7MP (interp.*)", "5MP",
"3MP", "2MP", "1.3MP" oder "0.3MP" are the available options. "MP" stands for
megapixel, e.g. the "5MP" setting creates a photo of 2592 × 1944 pixels, which
is about 5 million pixels. The larger the photos, the greater the detail. However,
the microSD card will fi ll up faster with higher resolution photos. Confi rm your
selection with the
*Interpolation = calculation method used to increase the number of pixels
Exposure
If you access this menu option, you can then adjust the photo exposure in three
steps upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker).
Use the ▲▼ buttons
and confi rm your selection with the
items.
3 photos in series
If you access this menu option, you can then use the ▲▼ buttons
activate or deactivate the function take a series of 3 photos in quick succession.
Confi rm your selection with the
items.
Self-timer
If you access this menu option, then you can use the ▲▼ buttons
self-timer function to 2, 5 or 10 seconds. The photo will then be taken after the
set delay when you press the
tivate the self-timer. Confi rm your selection with the
the list of menu items.

Playback mode

With the menu closed, press the MODE button
to playback mode. Using the ▲/▼ buttons
images. If you select a photo and press the
will be displayed in an endless slide show. Press the
stop the playback. If you select a video and press the
is played back.
CR 5 A1
/ button to return to the list of menu items.
/ to select the desired photo exposure compensation
/
/ button
/ button
button to return to the list of menu
to return to the list of menu
. Select "direct capture" to deac-
/ button
during photo standby to switch
/ you can scroll through the stored
/ button , all stored photos
/ button
/ button
/ to select
GB
/ to
/ to set the
to return to
again to
, the video
95