Beep Sound - Kompernass DASHCAM CR 5 A1 Operating Instructions Manual

Time & date
If you access this menu option, you can then use the ▲▼ buttons
whether the recordings are to be made with or without a date stamp. Select
"Time & date stamp on" to activate ths function or "Time & date stamp off " to
deactivate it.
To set the current date, call up "Set time & date". Then use the ▲▼ buttons
to set the current year. Press the MODE button
set the month. Press the MODE button
day. Press the MODE button
the current time. Press the MODE button
the minutes. Press the MODE button
seconds. Press the MODE button
required date format.
The options are "YY/MM/DD" for the two-digit date in the order "year/month/
day", "MM/DD/YY" for the two-digit date in the order "month/day/year" and
"DD/MM/YY" for the two-digit date in the order "day/month/year".
Confi rm your selection by pressing the
will return to the list of menu items.
Auto Power Off
If you access this menu option, you can the use the ▲▼ buttons
whether the device switches off automatically after "1 Min", "3 Min" or "5 Min"
of inactivity. If you select "Off ", the device will not switch off automatically.
Confi rm your selection by pressing the
will return to the list of menu items.
Impact sensor
If you access this menu option, then you can use the ▲▼ buttons
the sensitivity of the built-in impact sensor: "Very low", "Low", "Middle", "High" and
"Very high" are the available options. This feature automatically protects the current
video recording when it recognises an impact, which indicates an accident event,
from being overwritten during a loop recording. Confi rm your selection by pressing
the /

Beep sound

If you access this menu option, you can then use ▲▼ buttons
whether the device emits an acoustic signal when pressing the device's buttons
as well as the on/off function ("On"), or not ("Off "). Confi rm your selection by
pressing the
menu items.
CR 5 A1
to use the ▲▼ buttons
button . Afterwards, the display will return to the list of menu items.
/ button . Afterwards, the display will return to the list of
to use the ▲▼ buttons
to use the ▲▼ buttons
/
to use the ▲▼ buttons
to use the ▲▼ buttons
to use the ▲▼ buttons
/ button . Afterwards, the display
/ button . Afterwards, the display
/ to select
/
/ to
/ to set the
to set the hours of
/ to set
/ to set the
/ to set the
/ to choose
/ to select
/ to select
89
GB