Kompernass DASHCAM CR 5 A1 Operating Instructions Manual page 104

Fault
The device does not
respond as expected to
your operation.
The suction cup does not
hold fi rmly.
NOTE
► If you are unable to resolve the problem applying any of the aforemen-
tioned methods, please contact the Customer Service department.
CR 5 A1
Possible cause Rectifi cation
There is a defect. Use a pointed object, e.g. a paper clip,
to carefully press the switch behind the
RESET opening
restart the device.
The surface Clean the surface. You can also increase
being used is not the suction power by moistening the
clean. suction cup.
in the housing to
101
GB