Motion Detection - Kompernass DASHCAM CR 5 A1 Operating Instructions Manual

Motion detection

If you access this menu option, you can then use the ▲▼ buttons
or deactivate this function. Confi rm your selection with the
return to the list of menu items.
When this function is activated, the device will automatically stop the video
recording when no moving images are detected. If the device again detects
movements, the device will automatically begin recording again. If the function
is deactivated, the device does not stop recording if no motion is detected.
NOTE
► You should only activate this function while the vehicle is parked if you want
to automatically fi lm a break-in attempt or to record the other vehicle after
a collision.
► The initial recording with this function must be started manually.
Audio recording
If you access this menu option, you can then use the ▲▼ buttons
or deactivate audio recording via the built-in microphone. Confi rm your selection
with the
CR 5 A1
/ button to return to the list of menu items.
/ to activate
/ button to
/ to activate
93
GB