Kompernass DASHCAM CR 5 A1 Operating Instructions Manual page 95

GB
92
If you now press the MENU button
Motion detection
Using the ▲▼ buttons
and then call up this menu item with the
menu item without making a change, press the MODE button
current menu board as well as the total number of menu boards is shown. If the
lowest menu item on a menu board is selected which leads to a further menu
board, press the ▼ button
board. To close the menu, press the MENU button
Resolution
If you access this menu option, you can then set the the video resolution:
"1920 x 1080P (HD)", "1280 x 720P" and "640 x 480P" are the options avail-
able. Use the ▲▼ buttons
your selection with the
Exposure
If you access this menu option, you can then adjust the video exposure in three
steps upwards (from +1 to +3, brighter), or downwards (from –1 to –3, darker).
When the setting is set to "0" there is no exposure compensation. Use the ▲▼
buttons / to select the desired video exposure compensation and confi rm
your selection with the
Video length
If you access this menu option, you can then set the length of the loop for the
video recording: "3 Min", "5 Min", "10 Min" or "Loop recording off " are the
available options. Use the ▲▼ buttons
loop recording and confi rm your selection with the
the list of menu items.
Remember that the microSD card used must have a suffi cient capacity to record
the desired length of loop in the video resolution set. If you select "Loop record-
ing off " the recording ends when you reach the capacity of the microSD card.
When the end of the recording is reached, the device will start a new recording
with the length set.
If the capacity of the memory card is not suffi cient for the set duration, the record-
ing will be aborted. Reduce the length of the loop recording or use a memory
card with a greater capacity.
in video standby, the following menu opens:
/ you can move the selection bar to the desired entry
/
to jump to the fi rst entry on the following menu
/ to select the desired resolution and confi rm
/ button to return to the list of menu items.
/ button to return to the list of menu items.
/ to select the desired value for the
button . To exit the activated
. Below right, the
.
/ button to return to
CR 5 A1