Table of Contents
Advertisement
3.1
ASSEMBLY OF THE FUELBED
NOTE : The position of the fuel-bed components are critical to the
performance of the product. Therefore please ensure that the fuel-bed
components are positioned as described in the following section prior to
requesting a service call due to soot build up, poor flame pattern etc.
a)
Fit the fuelbed base into the combustion chamber as shown below in
Fig. 8. Ensure that the slot in the fuel-bed is located onto the lip on the
fuel-bed base support.
Fig. 8
b)
Fit coal "A" onto the fuelbed base in the position as shown below in
Fig. 9. The coal form has the individual placement letters stamped on
the bottom face.
Fig. 9
Section View of
Fuel-bed Base / Burner
Fuel-bed
Base
14
Locating Lip on
Fuel-bed Support
Burner
Coal Form "A"
Hide quick links:
Advertisement
Table of Contents
