Fig. 8
Removing the Upper Outer Case Fixing Screws
4.2
REMOVING THE BURNER ASSEMBLY FROM THE FIRE
a)
Disconnect the appliance from the gas supply. Remove the front panel
by unscrewing the retaining nuts below the front panel as shown in Fig.
9 below.
Fig. 9
b)
Remove the front bezel by unscrewing the 2 retaining screws, as shown
in Fig. 10 overpage.
Supplied By www.heating spares.co Tel. 0161 620 6677
16
Fixing Screws
Front panel
retaining bolts