Table of Contents
Advertisement
2.1
PACKING CHECK LIST
1 off Cast Canopy
1 off Firebox / Burner Assembly
1 off Flue Spigot
1 off Closure Plate
1 off Literature / Loose Items Pack
1 off Fuelbed
1 off Coal Pack
1 off Cast Fender
1 off AA battery
2.2
INSTALLATION OF FIRE
2.2.1
Preparation.
a)
Remove the glass panel by rotating the latch to release. Lift the glass
panel upwards and lift away. See Fig. 2.
Fig. 2
Remove the Glass Panel
b)
Grasp sides of the of the glass panel and pull lower edge forward.
c)
Remove the coal / fuelbed packs that have been retained by the glass
panel (not shown in Fig. 2 above)
d)
To re-fit the glass panel, engage the 2 side glasses in the sealing
channels, with the projecting glass edge uppermost. Slide the panel up
until the top edge enters the slot, then push the lower edge in and turn
the latch to secure it.
9
Glass Panel
Retaining Latch
Hide quick links:
Advertisement
Table of Contents
