Checking The Elan Interface Status Of The Pbx (Ld 137); Enabling The Elan Interface Of The Pbx (Ld 137); Checking The Status Of The Elan Connection To The Pbx (Ld 48) - Nortel NN44200-313 Quick Start Manual

Checking the ELAN interface status of the PBX (LD 137)

Perform the following procedure to check the ELAN interface status.
Step
1
2
3
4

Enabling the ELAN interface of the PBX (LD 137)

Perform the following procedure to enable the ELAN interface. If it is already
enabled, skip to the next procedure.
Step
1
2
3
4

Checking the status of the ELAN connection to the PBX (LD 48)

Perform the following procedure to check the status of the ELAN connection
to the PBX.
Copyright © 2007-2008, Nortel Networks
.
Checking the status of the ELAN connection to the PBX (LD 48) 15
Action
Connect to the PBX.
Enter LD 137.
Enter STAT ELNK. The status of the ELAN interface appears.
Note: If the ELAN interface is not configured, continue to
"Enabling the ELAN interface of the PBX (LD 137)" (page
If it is configured, continue to
connection to the PBX (LD 48)" (page
To exit the overlay, enter ****.
Action
Connect to the PBX.
Enter LD 137.
Enter CHG ELNK ACTIVE NAME, where NAME is the host name
for the primary IP address.
To exit the overlay, enter ****.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
—End—
"Checking the status of the ELAN
15).
—End—
—End—
15).