Callpilot Server Preinstallation; Recommended Tools; Nn44200-313 01.02 Standard - Nortel NN44200-313 Quick Start Manual

Telephony system
Table of Contents

Advertisement

CallPilot server preinstallation

This task describes the CallPilot server preinstallation.

Recommended tools

Copyright © 2007-2008, Nortel Networks
.
The following is a list of recommended tools for the job:
— antistatic ESD wrist strap kit
— cordless power drill with various Phillips, Robertson, and nut driver
bits
— hand-held Phillips, Robertson and standard screwdrivers in various
sizes
— handheld hex nut drivers
— needle-nosed pliers
— tweezers
— tape measure
— flashlight
— cable tie wraps (various lengths, mainly small ones required)
— side cutters
— utility knife or box cutter
— RJ45 crimper with various dyes (if making phone and Ethernet
cables)
— null modem serial cable (for troubleshooting purposes)
— cable identification labels
— equipment log, to record system information (for example, model,
serial number, and installed options)
— pen and note pad
Nortel CallPilot
Quickstart Guide

NN44200-313 01.02 Standard

5.0 19 May 2008
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Callpilot 5.0

Table of Contents