Electronically Controlled Damper Removal; Refrigerator Thermistor Removal; Crisper Light Cover And Socket Removal - Viking VCSF036SS Service Book

Disassembly Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect power to unit before servicing,
unless testing requires power.

Electronically Controlled Damper Removal

Condition Requirements:
Electronic Control Removed
1. Remove screw and damper cover from damper.
2. Remove foam insert by pulling it off of damper
control.
3. Depress two clips that hold front of damper in place
to release damper from unit.
4. Disconnect connectors from damper and remove
damper.
5. Reverse procedure for installation.
46
WARNING

Refrigerator Thermistor Removal

Condition Requirements:
Electronic Control Removed
1. Remove screw and damper cover from damper.
2. Unclip thermistor from assembly.
3. Cut wires at thermistor to remove.
4. Reverse procedure for installation.

Crisper Light Cover and Socket Removal

Condition Requirements:
Crisper Section Light Bulb Removed
1. Use a taped putty knife to pry socket from liner.
2. Mark and disconnect wires from socket.
3. Reverse procedure for installation.
©2007 Viking Preferred Service