Professional & designer freestanding refrigeration side trim, side panel, top panel & grille installationfrench door bottom mount with dispenser (4 pages)
Page 11
WARNING Some installations require door/drawer removal to transport the refrigerator to its final location. Make sure power cord is disconnected from power source. WARNING Some installations require door/drawer removal to transport the refrigerator to its final location. Make sure power cord is disconnected from power source.
Page 12
NOTE: Loosen screws three to four turns. Keep the screws in the drawer front.
Page 13
WARNING Some installations require door/drawer removal to transport the refrigerator to its final location. Make sure power cord is disconnected from power source. NOTE: For refrigerators in operation, shut off water before removing water line from the door.
Page 16
tube end is damaged, cut off 5/8” before reconnecting. If leaking occurs, reconnect the line. NOTE: If water line...
Page 17
NOTE: Use copper tubing only for installation. Plastic is less durable and can cause damage. dd 8 feet to tubing length needed to reach water supply for creation of service loop. i a . i a . i n . i n .
Page 18
NOTE: Complete any required panel installation and/or water supply connection before leveling. Refrigerator should be in permanent location prior to leveling. NOTE: Having someone push against the top of the refrigerator takes some weight off the leveler foot screws. NOTE: It may take several turns of the leveler foot screw to adjust the tilt of the refrigerator.
Need help?
Do you have a question about the F20481 and is the answer not in the manual?
Questions and answers