Figure
10-10 The Operation/Sequential Operations Page
10.6
Operation/Quick Operation Page
The Operation/Quick Operation page allows for the I/O ports to be quickly opened and
closed and the handler to be parked.
•
Touching the Open IO Port Left or Open
individual I/O ports to open. The I
•
Touching the Park Handler Front or Park Handler Back buttons commands the
handler (the robotics that handle the tape
front or rear of the library.
The Open IO Port Left and Right buttons will respect the current partition selection
and the library I/O Port configuration settings (section 9.1.4).
511000 Rev. F
IO Port Right buttons commands the
/O ports are closed by hand.
cartridges) to park itself at either the
Configuration Page
10-9