Qualstar RLS-8350 Installation And Operation Manual page 73

Folded up for removal.
Figure 5-40 Storage Matrix Top Handle
A storage matrix may be heavy when loaded with tapes and caution should be
taken to securely grasp the top handle when removing it or inserting it into the
library. Tilting the storage matrix when it is outside the library may cause tapes to
fall from the storage slots and become damaged.
5. While securely grasping the top handle of the storage matrix and using your
other hand to guide it, slide the matrix out of the library.
6. Place the storage matrix on a stable surface. It may be set upright or on its back.
7. Cartridges may now be loaded into the matrix. Make certain that cartridges are
properly oriented, and for new media, be certain to set the Write Enable tab to
its enabled position before installing.
8. When all the cartridges have been loaded into the matrix it is ready to be placed
into the library.
9. While securely grasping the top handle of the storage matrix and using your
other hand to guide it, align the matrix with its slots in the library.
10. Carefully slide it in until the handle on top of the matrix makes contact with the
library.
11. Fold the handle down 90 degrees so it will clear the libraries frame and continue
to slide it all the way into the library.
12. Lock the storage matrix with the key. See Section 6.2 for details.
5-38
Folded down for replacement.
CAUTION
Installation
511000 Rev. F