Qualstar RLS-8350 Installation And Operation Manual page 18

Figure 2-3 I/O Port Extended
2.6.2.3 Security
The storage matrix must be secured with a key operated lock for the library to
operate.
2.6.2.4 Power Switch and Indicator
The library's power status is indicated by a blue LED Power Indicator button on the
front of the library that illuminates when the power is applied. Standby/Soft-power is
controlled by a switch located inside the LED Power Indicator button. During standby
mode the center of the button flashes blue at the rate of one blink approximately
every two seconds. During power on mode the button is fully illuminated.
The primary power for the library is controlled by a rocker switch located on the rear
panel.
2-6 Product Description
511000 Rev. F