Qualstar RLS-8350 Installation And Operation Manual page 105

3. Press the Proceed button to advance to the screen
key to be entered. The data may be entered in either hex characters or Base64
character set. The two screens can we alternated by pressing the Base64 or Hex
button on the screen. Figure 9-10 shows both screens. When using hex
characters up to 64 digits may be entered. 43 characters are allowed in Base64
and they may include A through Z in both upper and lower case, 0-9, alo
the + and / symbols.
Pressing the Cancel button at any time befor
Configuration/Partition screen WITHOUT an encryption key being saved.
Figure 9-10 The Hex and Base64 screens
9-14
NOTE
e Step 9 w ill simply return the RLS back to the
Configuration Page
which allows the encryption
ng with
511000 Rev. F