Pitney Bowes DP50S Operating Instructions Manual page 80

3. Making Printer Settings Using the Control Panel
Paper Type: Bypass Tray
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3,
Color Paper, Letterhead, Label Paper, OHP (Transparency), Envelope, Coated Paper: Gloss
Print, Coated Paper, Preprinted Paper, Bond Paper, Cardstock, Thin Paper, Middle Thick, Thick
Paper 1, Thick Paper 2, Thick Paper 3, +Custom1, +Custom2, +Custom3, +Custom4, +Cus-
tom5, +Custom6, +Custom7, +Custom8
• Default : No Display (Plain Paper)
• For details about the types of paper that can be loaded in the Bypass Tray, see Hardware Guide.
• Be sure to set a paper type using the control panel. If you do not set it, the printing result might
not be proper.
Paper Type: Tray 1 to 5
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Color
3
Paper, Letterhead, Label Paper, Coated Paper: Gloss Print, Coated Paper, Preprinted Paper, Bond
Paper, Cardstock, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, +Custom1, +Custom2,
+Custom3, +Custom4, +Custom5, +Custom6, +Custom7, +Custom8
• Default : No Display (Plain Paper)
• For details about the types of paper that can be loaded in each tray, see Hardware Guide.
• Be sure to set a paper type using the control panel. If you do not set it, the printing result
might not be proper.
• Only installed trays appear on the display panel.
Duplex Tray
You can set each tray for duplex printing. Only installed trays appear on the display panel.
• Tray 1 to Tray 5
• On
• Off
• Default: On
• Bypass Tray
• On
• Off
• Default: Off
Auto Tray Select
You can select whether to assign each tray to automatically print the paper size and type set by
printer driver.
82