Pitney Bowes DP50S Operating Instructions Manual page 178

4. Monitoring and Configuring the Printer
Login to fileserver <file server name>(<IPX|
IP>,<NDS|BINDERY>)
Manual[%s] is disable, set authentication key.
Manual[%s] is disable, set encryption key.
Name registration failed. name=<NetBIOS
name>
Name registration success . WINS Serv-
er =<WINSserver address> NetBIOS
Name=<NetBIOSname>
Name registration success in Broadcast
name=<NetBIOS name>
npriter start. (NetWare)
4
Open log file <file name>
Print queue <print queue name> cannot be ser-
vicedby printer 0, <print server name>
Print server <print server name> has no printer
print sessions full
Printer <printer name> has no queue
pserver start. (NetWare)
Required file server (<file server name>) not
found
180
Message Problem and solutions
(In the print server mode) Login to the file server
isin the NDS or BINDERY mode.
Name registration of <NetBIOSName> failed.
Change to different NetBIOS name.
Name registration of <NetBIOS Name> to
<WINSserver address> was successful.
Name registration by Broadcast name
of<NetBIOS Name> was successful.
(In the remote printer mode) The NetWare ser-
vicehas started.
(In the print server mode) The specified log file
hasbeen opened.
(In the print server mode) The print queue can-
notbe established. Make sure that print queue
existson the specified file server.
(In the print server mode) The printer is not
assignedto the print server. Using NWadmin, as-
sign theprinter, and then restart it.
No more print jobs can be accepted. Wait a
whilebefore sending any more print jobs.
(In the print server mode) The print queue is no-
tassigned to the printer. Using NWadmin, assign
theprint queue to the printer, and then restart it.
(In the print server mode) The NetWare service
hasstarted.
The required file server is not found.