Btconfig - Pitney Bowes DP50S Operating Instructions Manual

4. Monitoring and Configuring the Printer
msh> bonjour lpr [0-99]
• ipp
msh> bonjour ipp [0-99]
You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate
higher priority.
IP TTL setting
msh> bonjour ip ttl {1-255}
You can specify the IP TTL (the number of routers a packet can pass through).
• The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
4
Reset the computer name. The default computer name will be displayed when the computer is
restarted.
• location
Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that communicates with linklocal ad-
dress.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the wireless LAN interface unit is installed.
ether
wlan

btconfig

Use the "btconfig" command to make Bluetooth settings.
View settings
Bluetooth settings are displayed.
142
Interface Interface configured
Ethernet interface
Wireless LAN interface