Wins - Pitney Bowes DP50S Operating Instructions Manual

Parameter
imca {on | off}
srvid "character string"
• You can use this command only when the wireless LAN interface unit is installed.

wins

Use the "wins" command to configure WINS server settings.
Viewing settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP ad-
dress is the valid address.
Configuration
msh> wins "interface_name" {on | off}
• {on} means "active" and {off} means "inactive".
• Be sure to specify the interface.
• wlan can be specified only when the wireless LAN interface unit is installed.
ether
wlan
Address configuration
Use the following command to configure a WINS server IP address:
"interface_name" {primary|secondary} "IP address"
• Use the "primary" command to configure a primary WINS server IPv4 address.
• Use the "secondary" command to configure a secondary WINS server IPv4 address.
• Do not use "255.255.255.255" as the IPv4 address.
Interface name
Remote Maintenance by telnet
Value configured
You can enable or disable the certificate when-
the intermediate certificate authority is present.
The default is "off".
You can set the server ID and subdomain of
thecertificate server.
Interface configured
Ethernet interface
Wireless LAN interface
msh> wins
4
171