Pitney Bowes DP50S Operating Instructions Manual page 167

Parameter
wepauth [open|shared]
rate [auto|11m|5.5m|2m|1m]
security {none|wep|wpa}
wpaenc {tkip|ccmp}
wpaauth {wpapsk | wpa}
psk "character string"
Remote Maintenance by telnet
Value configured
You can set an authorization mode when using
WEP. The specified value and authorized mo-
deare as follows:open: open system authorized
(default)shared: shared key authorized rate
You can set the wireless LAN transmitting
speed.
The speed you specify here is the speed at
whichdata is sent. You can receive data at any
speed.auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m:2 Mbps fixed
1m: 1 Mbps fixed
You can specify the security mode.none: No
encryption(default)Swep: WEP encryptionwpa:
WPA encryption
You can specify WPA encryption key when
using
WPA encryption.tkip: TKIP (default)ccmp:
CCMP (AES)
You can specify the WPA authentication mode-
when using WPA encryption.wpapsk: WPA-
PSK authentication(default)wpa: WPA(802.1X)
authentication
You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.
4
169