Timer Settings - Pitney Bowes DP50S Operating Instructions Manual

Warm-up Beeper
You can select whether or not to sound the beeper when the printer has completed a warm-up
process.
• On
• Off
• Default: On
Display Contrast
You can specify the density of the display.
Key Repeat
You can specify whether or not to scroll the display panel when the [ ] or [ ] key is held down.
When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll
speed becomes slow.)
• Do not Repeat
• Normal
• Repeat Time: Medium
• Repeat Time: Long
• Default: Normal

Timer Settings

Auto Reset Timer
Specify whether or not to cancel settings made if no operation has been performed for a certain
period of time while changing configuration using the control panel. When set to on, specify how
long the printer is to wait before resetting configuration.
• On
• Off
• Default: On (60 seconds)
Set Date
You can set the date of the printer's internal clock using the [ ] or [ ] key.
Set Time
You can set the time of the printer's internal clock using the [ ] or [ ] key.
Maintenance Menu
91
3