Winnebago Journey 34Y Owner's Manual page 45

Take precautions to protect carpet and interior
furnishings when removing engine covers. The
undersides of the engine covers could contain
deposits of oil and fuel or other engine fluids and
substances that could damage fabrics and interior
furnishings.
Model 34Y
• Using the Engine Cover Latch Key (located
on key ring), unlock the four outer Engine
Cover Latches as shown (white arrows).
Engine Cover Latch Key
(Located on key ring)
Engine
Cover Pulls
Engine Cover Latch Locations
(Located in bedroom)
* White arrows
• Grasp each center Engine Cover Pull (one
located on each engine cover), one at a time,
and lift covers to access engine.
Model 36M
• Remove mattress from bed and set aside in
another area of the coach.
DRIVING YOUR MOTOR HOME
• Lift bed board and remove gas struts (one
located on each side of bed board).
• Remove four screws (located on the top of the
upper bed board) and set aside.
• Remove bed board and set aside in another
area of the coach.
• Remove fasteners from metal engine cover
and set cover aside.
You have now accessed the engine.
NOTE: Remove wood panel (and two additional
metal engine covers) beneath bed for
further engine access.
Model 40U
• Remove mattress from bed and set aside in
another area of the coach.
• Remove the screws that fasten the foot end of
the bed board down to the bed base.
NOTE: If bed is designed for storage below bed
board, these screws will not be present.
• Lift the hinged bed board upward against
wall. Support the bed board with a suitable
prop item as shown.
SECTION 3 –
3-21