Table of Contents
Advertisement
3. Align table extension pegs with table insert
holes and push edge of dinette table in to
adjoin with the table extension.
4. Release the catch on the table leg brace
(located on the bottom side of dinette table)
and lower table leg for support.
NOTE: Some models may feature an extra-wide
dinette table with two support legs to be
lowered.
NOTE: Two folding chairs are provided for
additional seating when needed and are
stored in the rear wardrobe or under the
bed, depending on model.
FURNITURE AND SOFTGOODS
5. Reverse steps to store dinette table extension.
NOTE: Be sure to store dinette back into
standard position before converting
dinette into additional bed space.
NOTICE
Raise dinette table leg(s) and convert
dinette into stored position before
retracting the slideout room to avoid
property damage.
Dinette Table Leg Adjustment
It may be necessary to adjust the height of the
dinette table leg(s). Twist the knob on the bottom
of table leg up or down until you achieve an even
height.
EXTENDABLE SECTIONAL
DINETTE
–If Equipped
Dinette and Table Extension
1. Engage and Hold the black lever (located on
the end of dinette seat) and fully extend
dinette sectional extension.
SECTION 9 –
9-5
Advertisement
Table of Contents
Troubleshooting
