Winnebago Journey 34Y Owner's Manual page 131

5. Install seat back cushion, ensuring the back
slip cover slides over top of the seat back to
secure.
NOTE: Seat back cushions are stored in rear
wardrobe or beneath bed.
6. Repeat Steps 1 through 5 on opposite dinette
seat.
7. Loosen knobs beneath dinette table (one
located on each side of table).
8. Grasp the dinette table extension and pull
OUT to fully extended position.
9. Retighten knobs beneath dinette table to
secure.
FURNITURE AND SOFTGOODS
10. Insert table extension to adjoin with dinette
table.
NOTE: Table extension is stored beneath rear
bed.
11. Reverse steps to convert into single dinette
seating.
Dinette to Bed
• Perform Steps 1 through 6 in Dinette and
Table Extension section.
• Press the Table Leg Release Button and fold
table leg UP until it "clicks" into locked (90-
degree) position.
Table Leg Release Button
• Remove dinette table from the wall support by
lifting and pivoting the end of the table.
SECTION 9 –
9-7