Step 2: Installing The Cutting Tool - Roland TrueVIS VG-640 Setup Manual

Step 2 : Installing the Cutting Tool
1.
Enter "REPLACE KNIFE" menu.
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
MAINTENANCE
D
Press [ ] once, and then press [ ] several times to display the screen shown below.
MAINTENANCE
REPLACE KNIFE
E
Press [ENTER].
The cutting carriage moves to a position where the blade can be replaced.
F
When the following screen is displayed, open the front cover.
OPEN FRONT
Preparations are complete when this screen appears.
FINISHED?
COVER
4. Installing the Cutting Tool
27