Roland TrueVIS VG-640 Setup Manual page 13

D
Fully tighten the bolts in the order of
E
Attach the other arm to the right side as seen from the rear of the machine.
F
Place the shafts on the arms.
G
Pass the left media holder onto the shafts.
Pass it through from the right edge as seen from the rear of the machine.
Pass the front shaft through
the left media holder.
1 2
(stand rear), (stand side).
Catch the left media holder on the
rear shaft.
3. Assembly and Ink Filling
Tighten fully
Bolts: 4
11