Roland TrueVIS VG-640 Setup Manual page 11

I
Place the printer unit on the stand, and lightly tighten its bolts in the order of
Set the assembled stand upright, and then fix the printer unit to it by tightening the bolts (8 locations in
total). Use a washer for each bolt.
J
Fully tighten the bolts in the order of
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
1 2
, .
3. Assembly and Ink Filling
1 2
,
Tighten
temporarily
Bolts: 8
Washers: 8
Tighten fully
Bolts: 8
Washers: 8
.
9