Roland TrueVIS VG-640 Setup Manual page 10

3. Assembly and Ink Filling
G
Lightly tighten the bolts in the order of
Use a washer for each bolt.
H
Fully tighten the bolts in the order of
Before tightening the bolts, check once more that the 2 stand legs are parallel. If the inside of the stand
stay is touching the L-shaped brackets and the stand legs, the stand legs will be parallel.
When tightening the bolts fully, tighten them securely. Loose bolts may cause the stand to wobble.
8
1 2
, .
1 2
, .
Tighten
temporarily
Bolts: 6
Washers: 6
Tighten fully
Bolts: 6
Washers: 6