Filling Ink - Roland TrueVIS VG-640 Setup Manual

The screen shown below appears.

FILLING INK...

>>>>>
B
Close the ink slot cover.
C
When the screen shown below appears, remove the drain bottle and discard the dis-
charged fluid.
EMPTY
DRAIN BOTTLE
CAUTION
WARNING
CAUTION
D
Quickly attach the emptied drain bottle to the machine once more.
M E MO
When using four colors (CMYK), repeat steps
E
Press [ENTER].
When the screen shown in the figure appears, filling with ink is finished.
SETUP SHEET
XX:XX
Before you detach the drain bottle, be sure to wait for the screen to display
"EMPTY DRAIN BOTTLE." After discarding the discharged fluid, promptly
attach the drain bottle to the machine.
Failing to follow this procedure may cause discharged fluid to flow out of the
tube and spill, soiling your hands or the floor.
Never place discharged fluid or ink near an open flame.
Doing so may cause a fire.
To store discharged fluid temporarily, place it in the included drain bottle
or in a durable sealed container such as a metal can or polyethylene tank,
and cap the container tightly.
Any spillage or vapor leakage may cause a fire, an odor, or physical distress.
C D
and twice.
3. Assembly and Ink Filling
25