Remote Control - Nokia Mediamaster 9828 Owner's Manual

REMOTE CONTROL

This section describes how to operate the Mediamaster using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.
Switch the Mediamaster in and out of standby mode.
EXIT TV To return to the viewing mode from a menu without s t o r -
ing settings (in menu mode.)
Switch between TV or Radio mode (in viewing mode.)
Turn the sound off/on (mute.)
- + Adjust the volume. The Mediamaster's maximum level is
controlled by the TV's present volume setting.
0 - 9 Change channel and to select individual menu options.
Note: If 0 is entered as the first digit, the TV Release func-
tionality is activated (see below.)
0 TV Release. Switch between digital TV, analogue TV and
analogue satellite TV and VCR, when your systems are con-
nected by SCART leads.
Info. To display short and extended information (if transmit-
ted) about current and next programmes.
BACK Go back one level in the menus.
TEXT Select teletext information.
Press to enter teletext (if available).
MENU To display or exit from the "Main Menu" screen.
GUIDE To obtain a list of present and following programmes for the
available channels. This information is only shown if your
Service Provider transmits programme information (EPG
information.)
P+ P- Change channels up and down.
Change page in a menu/list/text if more than one page is
available. To browse through teletext history.
Move up/down in the menus and to change channels.
Change settings in menus.
OK Confirm choices and selection of a highlighted item.
Display the TV channel list.
(Red) To download an "Open TV" application
OPTION (Green) Select options in viewing mode.
(Blue) Toggle between present and previous TV/Radio
channels.
FREEZE (Yellow) Select the freeze function.
Press once to freeze the screen picture.
Press any other key to return to normal mode again.
GB 5