Table of Contents
Advertisement
MAIN MENU
Guide
Press GUIDE to get access to the receiver's EPG.
Refer to page 17.
System Configuration
You will be asked to enter your access code before you can open
this menu. The code is preset to 1234 from the factory.
(The code can be changed from the Parental Control menu. Re-
fer to page 26.)
If you want to customize the system to suit you better, you can
specify some settings from the submenus in the "System Con-
figuration" menu.
Please note that many of these functions are the same as in the
"First Time Installation."
Channel Search
The Channel Search procedure can be performed in different
ways. You can perform an Automatic or a Manual Search.
Refer to page 14.
GB 24
Advertisement
Table of Contents
