This section describes how to operate the Mediamaster using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.
To switch the Mediamaster in and out of standby mode.
EXIT TV To return to the viewing mode from a menu without s t o r -
ing settings (in menu mode).
To switch between TV or Radio (in viewing mode).
To turn the sound off/on (mute).
To adjust the volume. The Mediamaster's maximum level is
controlled by the TV's present volume setting.
0 - 9
To change channel and to select individual menu options.
Note: If 0 is entered as the first digit, the TV Release func-
tionality is activated (see below).
TV Release. To switch between digital TV/Radio, analogue
TV and analogue satellite TV and VCR, when your systems
are connected by SCART leads.
Info. To display short and extended information (if transmit-
ted) about current and next programmes.
To go back one level in the menus without storing settings.
To select teletext information.
Press to enter teletext (if available).
To display or exit from the "Main Menu" screen.
To obtain a list of present and following programmes for the
available channels. This information is only shown if your
Service Provider transmits programme information (EPG in-
To change channels up and down by one unit.
To change page in a menu/list/text if more than one page is
available. To browse through teletext history.
To move up/down in the menus and to change channels.
To change settings in menus.
To confirm choices and selection of a highlighted item.
To display the TV/Radio channel list (in viewing mode).
(Red) To download an Open TV application.
OPTION (Green) To select service options in viewing mode.
OPTION + code: to open a locked channel.
FREEZE (Yellow) To select the freeze function in viewing mode.
Press once to freeze the screen picture. Press the button
once again to unfreeze the picture.
(Blue) To toggle between present and previous TV/Radio
channels in viewing mode.