Main Motor/ Solenoid - Oki C3530nMFP Maintenance Manual

4.2.3.20 Main motor/ Solenoid

(1) Remove the left side cover. (See Subsection 4.2.3.1)
(2) Remove the right side cover. (See Subsection 4.2.3.2)
(3) Remove the rear cover. (See Subsection 4.2.3.3)
(4) Remove the front cover (See Subsection 4.2.3.4)
(5) Remove the plate shield front. (See Subsection 4.2.3.16)
(6) Remove the top cover assembly. (See Subsection 4.2.3.5)
(7) Remove the control panel assembly. (See Subsection 4.2.3.9)
(8) Remove the feeder unit assembly. (See Subsection4.2.3.11)
(9) Remove the guide eject assembly. (See Subsection4.2.3.14)
(10) Remove the color registration assembly. (See Subsection 4.2.3.17)
(11) Remove the plate shield rear. (See Subsection 4.2.3.18)
(12) Take out two screws (silver)
(13) Remove a screw (silver)
(14) Remove five screws (silver)
(15) Remove two screws (silver)
(16) Remove two screws (silver)
(17) Remove two screws (silver)
(18) Remove two screws (black)
(19) Remove two screws (black)
(Tool No. 1)
(20) Remove a spring
(21) Remove a spring
hopping roller
(22) Remove the lever end
43605601TH Rev.1
to remove the part A and the side plate R assembly
to remove the plate lockout ID
to remove the part B and the bracket inner
to remove the Fuser- motor
to remove the DC motor
to remove the ID lift up motor
to remove the hopping motor
to remove a claw C and the Gear-HP-assembly
, a screw and solenoid
, a claw D of the hoppingroller
and frame hopping .
.
.
.
.
.
.
.
, claw E of the gear
Oki Data CONFIDENTIAL
.
.
.
, bushing ,
85 /