Oki C3530nMFP Maintenance Manual page 114

(3) To be applied for every model.
(3-1) Switch to shipping mode
When engine control circuit board has been exchanged, it will become factory mode.
Therefore you can change it to Shipping Mode.
• Change to the menu of [Section 2.4.1.1.2.2 Factory/Shipping mode] in the [Section
2.4.1.1.2 PU circuit board setting function] of the maintenance utility.
(3-2) Set the desired market [Method of Confirmation: Status Page printing (C3530MFP/
C3520MFP)]
Because the default setting is OEL, the desired market must be set at shipment.
Note!
This setting will be stored in the EEPROM of the BLA circuit board.
1. Maintenance circuit board:For international sales/ODA/OEL/APS facing maintenance circuit
2. Set the desired market : Set by PJL command or maintenance utility.
3. Explanation: PX732 is a common ROM both for domestic and international markets. When
Note!
Because of the EEPROM exchange (engine control circuit board), the life information
of belt and ID, etc. has been cleared. Please notice that there may appear some
errors in the life management until the following unit exchange is done.
Item
Fuser unit
Belt unit
Image drum unit - Black
Image drum unit - Yellow
Image drum unit - Magenta
Image drum unit - Cyan
Total number of
sheets fed
Pages - Black
Pages - Yellow
Pages - Magenta
Pages - Cyan
43605601TH Rev. 1
board, this setting is left as default at shipment.
used in devices of different desired markets, it is necessary to set the desired
market (the default is OEL facing)
This setting will be stored in the EEPROM of the BLA circuit board.
This setting in maintenance circuit board is left as default at shipment, when
put in use, this setting will be executed. If the program version is changed, it
will return to the initial value.
Description
Fuser unit life count
Belt unit life count
Respective life counts
of image drum units
Printer life count
Respective numbers
of pages impressed
(images) with image
drums
Count Description
A value converted on a A4-size-paper basis from
number of pages printed (prints) after installation of
a new fuser unit.
A value converted on a A4-size-paper basis from
number of pages impressed (images) after installa-
tion of a new belt unit.
Values converted on a A4-size-paper basis from
numbers of revolutions after installation of new im-
age drum units.
Total number of sheets fed sheets fed.
Numbers of pages impressed (images) from instal-
lation of new image drum units.
Oki Data CONFIDENTIAL
114 /