PRINTER 3000 304 995 - 01
2.5.3 MAIN MOTOR REMOVAL
2.5.2 FAN MOTOR
Preparation:
Preparation:
1) Remove the upper unit. (See Upper Unit Removal.)
1) Remove the upper unit. (See Upper Unit Removal.)
PRINTER MODEL-L1
2) Remove the paper tray.
3) Remove the toner cartridge.
[A]: Fan motor (1 screw & 1 harness)
4) Remove the laser unit (* 2.2).
[A]: Paper tray guides (2 screws)
[B]: Left shield (13 screws & 2 screws at the bottom)
[C]: Right shield (9 screws)
[D]: Laser shield (4 screws)
[E]: Guide shield (4 screws)
[F]: Main motor (3 screws and 1 harness)
SERVICE MANUAL
(
G191
TECHNICAL DOCUMENT
G182R035.JPG
[A]
)
[B]
[F]
[F]
2-17
2-18
i
[A]
[E]
[C]
G182R038.JPG
G182R040.JPG
[D]
G182R041.JPG