Oki C3530nMFP Maintenance Manual page 162

No. Level
One of the following has occurred.
～The toner sensor has detected a problem.
～No toner cartridge is installed.
～The toner cartridge lever is left unlocked.
～The image drum is not set in place.
208 Error
This status appears only in Factory mode. If this error is
detected in Shipping mode, it is displayed as a warning.
%COLOR%
Yellow
Magenta
Cyan
Black
Waste toner is full.
When a cover is opened and closed, the status changes to
a warning. An error occurs again, after printing 500 sheets.
209 Error
If this error occurs during photocopying, the photocopying
is interrupted.
This notifies expiration of the life of the transfer belt.
The counter shows that the belt has reached
the end of its life. Photocopying is interrupted.
Error
210 When a cover is opened and closed, the status changes to
a warning.
If this error occurs during photocopying, the photocopying
is interrupted.
This notifies expiration of the life of the fuser.
The counter shows that the fuser has reached the end of its
life. Photocopying is interrupted.
Error
211 When a cover is opened and closed, the status changes to
a warning.
If this error occurs during photocopying, the photocopying
is interrupted.
A paper jam occurred in the paper path.
If this error occurs during photocopying, the photocopying
is interrupted.
212 Error
The fuser is not set in place.
Error
213
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1 (Function name)
2 Check Toner Cartridge
3 %COLOR%
4 Toner Sensor Error
5
1 (Function name)
2 Replace Belt
3 Belt Life
4
5
1 (Function name)
2 Install New Belt Unit
3 Belt Unit Life
4
5
1 (Function name)
2 Install New Fuser Unit
3 Fuser Unit Life
4
5
1 (Function name)
2 Open Front Cover
3 Paper Jam
4
5
1 (Function name)
2 Check Fuser Unit
3
4
5
PJLStatusCode
40959(K)
40960(Y)
40961(M)
40962(C)
40964
40970
40971
40981
40982
40992
162 /