Oki C3530nMFP Maintenance Manual page 130

No. Level
Scanner communications error: Data was sent to the
scanner with invalid parameters specified in the command
container.
This message is displayed until the Stop button is pressed.
%CODE%
57 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Invalid container length,
protocol type, container type, or additional data was sent
to the scanner.
This message is displayed until the Stop button is pressed.
%CODE%
58 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Invalid command was sent
to the scanner.
This message is displayed until the Stop button is pressed.
%CODE%
0x01 - 0x0F
59 Error
%TIMING%
Command Container
Data Container
Response Container
Lamp error has occurred.
60 Error
Home sensor error has occurred.
61 Error
Sensor error has occurred.
62 Error
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1
2 Power Off/On
3 Scanner Invalid Parameter
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Invalid Value
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Invalid Command
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Lamp Error
4
5
1
2 Power Off/On
3 Scanner Home Sensor Error
4
5
1
2 Power Off/On
3 Scanner Sensor Error
4
5
PJLStatusCode
40772
40773
40774
40779
40780
40781
130 /