Paper Eject Jam Occurred Immediately After Paper Pickup - Oki C3530nMFP Maintenance Manual

(6-2) Paper eject jam occurred immediately after paper pickup.

Confirmation Items
(6-2-1) Check the paper route condition
Faceup stacker cover
Rear panel
Paper-ejecting route
across paper eject part.
(6-2-2) Check the mechanical parts condition
Check the eject sensor
lever.
(6-2-3) Check the motor operation
Fuser motor
(6-2-4) Check the connection
Paper feed motor cable
Fuser motor
43605601TH Rev. 1
Confirmation Tasks
Check whether the cover is completely close or open. Do not keep the
Check whether rear panel is installed normally and
may disturb the operation.
By visual inspection, check whether there exists
something like load that may disturb the paper-ejecting
operation.
Check whether eject roller is jammed.
Check whether there is something abnormal about the
form of sensor lever and its movement.
By using the motor clutch test function of the
maintenance utility, check whether fuser motor
operates normally.
Check whether load exists.
Check the cable connection.
By visual inspection, please check whether
incompletely connection and oblique insertion of HEAT
connector of main board (M32 PCB) or defective cable
assembly exists.
Oki Data CONFIDENTIAL
Action at NG
cover in incomplete
close/open state.
Reinstall the rear
panel correctly.
Repair the load.
Replace the sensor
lever with a new
one.
Replace the main
board (M32 PCB)
or fuser motor or
fuser with new one.
When trying to use
a new fuser, please
utilize the fuse
keep mode of the
maintenance utility.
(See Note! on page
154.)
Connect the cable
normally.
Replace the cable
with a new one.
Replace the fuser
motor with a new
one.
193 /