Changing To Another Paper Size And Printing When Paper Runs Out - Sharp MX-M266N Operation Manual

CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded
in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched
and paper is loaded in the machine. If you wish to print on paper in another tray because the desired size of paper is not
immediately available, follow the steps below.
1
Print Job Scan to
Job Queue
Sets / Progress
Computer01
2
(1)
Detail
Computer01
Data : File-01.tiff
Color / B/W : B/W
3
11x17
Paper : Paper Select
Plain
Detail
Computer01
Paper Select
Paper Tray
4
1.8½x11
2.8½x11R
3.8½x14
4.11x17
If you changed to a different paper size, printing may not take place correctly; for example part of the text or image may run
off the paper.
Fax Job Internet Fax
Status
Spool
Paper Empty
020 / 001
Job Queue
1 Complete
1
Detail
Priority
Stop/Delete
(2)
OK
020 / 000 Paper Empty
Document
2-Sided
Style:
(Book)
Output :
Special
Modes:
OK
020 / 000 Paper Empty
OK
Bypass Tray
8½x11
Plain
Plain
Plain
Plain
Plain
Press the [JOB STATUS] key.
Display details on the print job for which
there is no paper.
(1) Touch the key of the job for which "Paper
Empty" appeared.
(2) Touch the [Detail] key.
Touch the [Paper Select] key.
Touch the key of the tray that has the
paper you wish to use.
Printing begins.
3-67
PRINTER
Contents