Copying In The Center Of The Paper (Centering) - Sharp MX-M266N Operation Manual

COPYING IN THE CENTER OF THE PAPER (Centering)

This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centering function
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Image Edit] key.
+
[Image Edit] KEY
(1)
Special Modes
Image Edit
3
Photo Repeat
Centering
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
4
touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
• The image can be reduced when using the centering function, but not enlarged.
• When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centering...
Touch the [Centering] key in the screen of step 3 so that it is not highlighted.
keys to switch through the screens.
(page 2-100)
(2)
OK
OK
Multi-Page Mirror
Enlargement Image
B/W
Reverse
).
Using the centering function
Select Centering.
(1) Touch the [Centering] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-107
COPIER
Contents