Sharp MX-M266N Operation Manual page 54

This appears when the data security kit is
being used.
The icon appears when the machine is
communicating with an external application.
When a wireless LAN USB adapter is
connected to the machine
• : Connected to an access point
• : Not connected to an access point
• : Waiting in ad-hoc mode
(3) Brightness adjustment key
Touch this key to adjust the brightness of the touch
panel.
When touched, the following screen appears next to the
key.
Touch the [+] key or the [-] key to adjust the brightness.
When finished, touch the brightness adjustment key
again to close the screen.
NOTIFICATION INDICATOR
The data notification indicator (
machine.
Tray Error indicator (
Solidly Errors that do not stop machine
operation, such as almost out of toner.
Blinks Errors that stop machine operation,
such as misfeeds and out of toner.
"Pattern 1" and "Pattern 2" on the data notification indicator (
system settings (administrator).
) and the error indicator (
) (red)
Job in progress, such as paper feeding
or output.
Scanning an original or processing
data
1-13
BEFORE USING THE MACHINE
) lights solidly or blinks to indicate the status of the
Data notification indicator (
Pattern1
Ready state or other state where jobs
can be accepted.
Job processing in progress
) can be set in the "Status Indicator Setting" in the
) (green)
Pattern2
Contents