Sharp MX-M266N Operation Manual page 177

4
The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm).
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
5
touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
To cancel tab copy...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Initial Tab Copy Setting
The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".
Load the tab paper.
When using the bypass tray, place the paper with the print side
Reverse side
down.
Place the paper so that the sides with the tabs enter the
machine last.
After loading the tab paper, configure the bypass tray settings
as explained in
TRAY" (page 2-34).
).
2-76
"MAKING COPIES USING THE BYPASS
Contents
COPIER