Channel Selection - Icom ic-F3262DT Instruction Manual

Channel selection

■
Several types of channel selections are available. Methods
may differ, depending on the presetting.
NON-ZONE TYPE:
To select the desired operating channel:
• Push [CH Up] or [CH Down].
• Rotate [ROTARY SELECTOR]*.
- Up to 16 preprogrammed channels can be selected.
• Push one of [MR-CH 1] to [MR-CH 4].
ZONE TYPE:
To select the desired zone:
• Push [Zone], then push [CH Up] or [CH Down].
• Push [Zone Up] or [Zone Down].
• Rotate [ROTARY SELECTOR]*.
- Up to 16 preprogrammed zones can be selected.
* Depending on the presetting.
When [ROTARY SELECTOR] selects "Operating channel," [CH Up]/
[CH Down] are disabled.
When [ROTARY SELECTOR] selects "Operating zone," [Zone] or
[Zone Up]/[Zone Down] are disabled.
To select the desired zone using the 10-keypad:
• Push [Zone], then push keys on the 10-keypad to input the
desired zone number. After inputting, the zone is selected.
To select a single figure zone, input '00' before the zone
number. To select a double figure zone, input '0' before the
zone number.
Push [Zone].
[Example]
To select
Zone 2
001 ch-01
Channel 1
CALL SHFTdPMR ZONE
Zone 2 is selected.
002 ch-01
Channel 1
CALL SHFTdPMR ZONE
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When you turn
ON power, the transceiver automatically starts scanning.
Scanning stops when a call is received.
D Voting operation (for zone selection)
The transceiver automatically starts scanning when a zone,
specified for the voting operation, is selected.
The voting scan detects the signal of the repeater and auto-
matically selects the strongest station.
3
BASIC OPERATION
Zone text is displayed.
Digital
CALL SHFTdPMR ZONE
Input '002' with 10-keypad.
ZONE00_
CALL SHFTdPMR ZONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
14