Icom ic-F3262DT Instruction Manual page 16

2
PANEL DESCRIPTION
CALL KEYS "CALL" "CALA" "CALB"
Push to transmit a 2/5-tone code or BIIS/dPMR call.
• A Call transmission may be necessary before you call another sta-
tion, depending on your signalling system.
• [Call A] and/or [Call B] may be selectable when your system
employs selective 'Individual/Group' calls. Ask your dealer which
call is assigned to each key.
EMERGENCY KEY "EMR"
Hold down to transmit an emergency call.
• The emergency call transmits and beep sounds. The display does
not change.
• The transceiver can transmit the emergency call silently, or with the
display changing, depending on the presetting. Ask your dealer for
details.
• If you want to cancel the emergency call, hold down the key again
before transmitting it.
• The emergency call is transmitted only one time, or repeatedly until
receiving a control code, depending on the presetting.
SURVEILLANCE KEY "SURV"
Push to turn the Surveillance function ON or OFF.
When this function is turned ON, a beep is not heard and the
LCD backlight and BUSY indicator do not light when a signal
is received or a key is pushed.
11
TX CODE ENTER KEY "TXCE"
Push to enter the TX code edit mode (5Tone) or the ID code
edit mode (BIIS, dPMR). Then push [CH Up] or [CH Down] to
set the desired TX code or ID code. (p. 17)
TX CODE CHANNEL SELECT KEY "TXC"
➥ Push to enter the TX code channel selection mode or the
ID selection mode (BIIS, dPMR) Then push [CH Up] or
[CH Down] to select the desired channel or ID. (p. 16)
➥ Hold down this key for 1 second to enter the TX code edit
mode (5Tone) or the ID code edit mode (BIIS, dPMR).
Then push [CH Up] or [CH Down] to set the desired TX
code or ID code. (p. 17)
TX CODE CHANNEL UP/DOWN KEY "TXCU" "TXCD"
Push to select a TX code channel (p. 16) or the ID (BIIS,
dPMR).
ID-MEMORY SELECT KEY "IDMS"
➥ Recalls detected ID codes.
• Push this key, then push [CH Up] or [CH Down] to select the ID
code.
• Up to five IDs are memorized.
➥ Hold down for 1 second to erase the selected ID.